860W quarter-brick DC-DC converter adds data recorder
Flex Power Modules is introducing a quarter-brick, non-isolated DC-DC converter rated at 860 W continuous and 1200 W peak power with a built-in data recorder.
The MBR350 is intended as an intermediate bus converter for powering processors and ASICs with peak power demands. The PMbus interface includes an ‘event data recorder’ which can be interrogated for analysis of stress conditions before converter shut-down.
直流-直流转换器的输入- V (80 V /100 ms) and a fully regulated output of 12 V at 100 A maximum, adjustable from 8 V to 13.2 V. A transformer-coupled, non-isolated topology reduces component count and current stress and yields an efficiency level peaking at 97.8 percent at half load 48 V input voltage. Derating for the BMR350 is characterized by the Flex Power Modules 3D thermal data graphs which specify available output power for given real-world pin and baseplate temperatures up to 100°C, with the user’s airflow rate. This enables maximum power to be extracted without stress to the converter.
For higher power levels, active current sharing between paralleled modules is an option. The BMR350 meets EMI standard EN 55032/FCC part 15J ‘Class B’ with a recommended external filter.
Full protection is included against output over-voltage, over-current and module over-temperature and a PMBus interface provides remote control and monitoring, supported by the Flex Power Designer software tool.
The BMR350 is in the standard quarter-brick format of 58.4 x 36.8 mm footprint with a height of just 12 mm, which includes the integrated baseplate with its threaded fixing holes. Terminations are via through-hole pins, suitable for pin-in-paste reflow, wave or manual soldering and positions are compatible with similar products on the market.
“We have adopted a novel approach with the BMR350 with its transformer-coupled, non-isolated topology. This keeps costs and component stresses low without compromising efficiency,” said Anders Sellin, Product Manager Flex Power Modules.
The BMR350 will be available in OEM quantities in the end of Q1 2022 with more variants following in 2022.
Related Flex articles
- Joins Xilinx power programme to support FPGA designs
- Infineon teams for 48V switched capacitor IBC bus converter
- Free power system design tool adds thermal simulation
- 48V move for direct conversion for data centre and cloud
- Digital power system design tool extended
Other articles on eeNews Power
- Power Roll teams for solar irrigation
- Nexeon ramps up for silicon anode production with $80m
- Electric conversion programme for the classic Mini
- Williams Advanced Engineering sold in £164m deal
- Double boost for European power design
